Vibe Game One
PS5BetaFree

PS5 SSD Compatibility Checker

Enter an M.2 SSD’s specifications and compare them with Sony’s published PS5 requirements for interface, capacity, size, thickness and cooling, plus the speed recommendation.

PS5 SSD Compatibility Checker

Enter the drive’s specifications

Copy values from the manufacturer’s spec sheet. Leave anything you don’t know blank and it will be marked as not verified.

1. Interface

Usually listed as “PCIe Gen4 x4, NVMe”.

2. Capacity

Decimal units: 1 TB = 1,000 GB.

3. Form factor and size

The four or five digits after “M.2”.

The module length, e.g. 80 mm for a 2280 drive.

Including any heatsink.

4. Thickness

Overall height, including any heatsink.

Height of components and heatsink on the top side.

Height of anything on the underside.

5. Performance

Sony recommends 5,500 MB/s or faster. This is a recommendation, not a requirement.

6. Heatsink or cooling

An effective heat-dissipation mechanism is required. A heatsink or a heat-transfer sheet are examples. The drive doesn’t need a built-in heatsink if you fit a suitable separate one.

Results

Enter what you know about the drive, then select Check specifications.

This check compares what you enter with Sony’s published requirements. It can’t test a physical drive and is not a guarantee of compatibility: Sony states it cannot guarantee that every M.2 SSD meeting its specifications will work. Reference values last reviewed 19 November 2026. Always confirm with Sony’s official M.2 SSD guidance (opens in a new tab).

Official guidance

Sony publishes the M.2 SSD requirements for PS5. Read Sony’s guidance (opens in a new tab) before buying or installing a drive.

Independent tool

Vibe Game One is not affiliated with Sony. Results are estimates to help you plan. Always confirm against your console’s current system software and the manufacturer’s specifications.

Affiliate links

Vibe Game One doesn’t currently use affiliate links or advertising. If we add them in future, they’ll be clearly labelled and will never decide what we recommend. Learn more.

How this tool works

The checker compares each value you enter with the requirements Sony publishes for the PS5 M.2 expansion slot. It does not look up products and contains no product database, so it only knows what you tell it.

The three possible results

  • Appears to meet the published requirements. Every requirement was checked and none failed. This is not a guarantee that the drive will work.
  • Does not meet one or more published requirements. At least one value is outside the published limits. Each issue is explained.
  • Unable to verify. Nothing failed, but some information is missing or the values contradict each other.

Requirements vs recommendations

Sony separates what a drive must meet from what it recommends. The checker does the same. Sequential read speed is a recommendation: a slower drive is flagged, but that alone doesn’t change the overall result.

Heat dissipation and measuring

An effective heat-dissipation mechanism is required. Sony gives a heatsink and a heat-transfer sheet as examples of cooling structures. A built-in heatsink isn’t mandatory: a drive without one meets this requirement once a suitable separate cooling structure is fitted.

The size limits apply to the drive and its cooling structure together, so enter the width and thickness with it attached. If you plan to add a separate one, check that the combined size stays within the limits.

Published reference specifications

PS5 M.2 SSD published requirements and recommendations
SpecificationPublished valueType
InterfacePCIe Gen4 x4 M.2 NVMe SSD (Key M)Requirement
Capacity250 GB to 8 TBRequirement
Form factorM.2 2230, M.2 2242, M.2 2260, M.2 2280, M.2 22110Requirement
Length30, 42, 60, 80, 110 mmRequirement
WidthUp to 25 mmRequirement
Total thicknessUp to 11.25 mmRequirement
Thickness above the boardUp to 8 mmRequirement
Thickness below the boardUp to 2.45 mmRequirement
Heat dissipationEffective heat-dissipation mechanism (e.g. heatsink or heat-transfer sheet)Requirement
M.2 SATA SSDsNot supportedRequirement
Sequential read speed5,500 MB/s or fasterRecommendation

Source: Sony Interactive Entertainment, “How to install an M.2 SSD in your PS5 console” (opens in a new tab). Values last reviewed 19 November 2026. Size limits include any heat-dissipation mechanism.

Rounding allowance: Sony lists exact lengths. To handle spec-sheet figures such as 80.15 mm, the checker matches a length within ±0.5 mm to the nearest listed length and says so in the result. This allowance is a Vibe Game One implementation choice, not a Sony tolerance.

PS5Hardware

How to Choose an SSD for Your PS5

What PCIe Gen4 x4 NVMe means, the size and cooling limits, how to pick a capacity and what to check before you buy.